ZDCS2 Motor unit

MAIN DESCRIPTION

Motor unit Z series with DCS controller (ZDCS2) shall be used on medium-sized wiper systems (arm length up to 950 mm). It is equipped with an electronic speed regulator able to communicate with other devices via the CAN bus. This motor is designed to ensure:

  • Movement synchronization of different wiper arms belonging to a group, using the CAN bus communication;
  • Two wiping speeds and five interval delays. The operating conditions are stabilized by the speed regulator in a wide range of voltages;
  • Compact motor unit size with specially designed electric box: it is possible to remove a motor without interrupting the CAN bus communication;
  • Motor unit overheating electronic protection;
  • Park position side fast setting.

Product features

Standard version technical features 
Model number M/NZDCS2
Available rated voltageV = 24 Vdc
V = 110 ÷ 220 Vac multi-voltage
Starting torque45 Nm
Nominal power55 W
Starting power220 W
Low speed V1 = 30 stroke/min
High speed V2 = 45 stroke/min
Bushing for wall thickness D D = 10 ; 20 ; 30 ; 40 ; 50 ; 60 ; 70 ; 80 ; 100 mm
Within 250 mm on request
Wiping angles α α = 30°÷110° with 5° step
Self parkingFc = DX right side, internal view and window upper part motor mounted
Fc = SX left side, internal view and window upper part motor mounted
Weight4,6 Kg
FinishingGrey painted

Compatible Product

Compatible product Typology Model numberLink
Wiper armsPantograph (up to 950 mm)
Pendulum (up to 950 mm)
Z20P
Z20F
View
View
Control systemAdvanced Distributed Control SystemDCSView

Product Identification

Each motor unit ZDCS2 series is uniquely identified by its serial number reported on a label placed on the back side of the wiper motor.

Part numberParameter nameParameter value
M/N.V.D.αModel number M/NM/N = ZDCS2
Voltage VV = 024 for 24 Vdc
V = 110 for 110 Vac, 50/60 Hz
V = 220 for 220 Vac, 50/60 Hz
Wall thickness DD = 10 ; 20 ; 30 ; 40 ; 50 ; 60 ; 70 ; 80 ; 100 mm
Wiping angles αα = 030÷110 step 5°

Example: “ZDCS2.110.015.090” indicates ZDCS2 model wiper motor, 110 Vac voltage, shaft suitable for wall thickness within 15 mm and 90° wiping angle.

If you cannot find the right product version or for any questions, do not hesitate to contact us. Please always communicate the motor serial number for spare parts.