UC Control system

MAIN DESCRIPTION

The UC control system is designed to actuate traditional pantograph, pendulum and straight line wipers.  The UC system can also drive auxiliaries devices to be used together the wiper system like fresh water/purge air electrovalves, wiper and window heaters. It is also possible to drive other devices, such as clear view screens. There are different versions of the UC control unit: the main difference consists in the number of wipers and auxiliaries that can be operated.

 UCS systemUCP systemUCP customized system
Wipers actuated From 1 to 2From 2 to 10From 10 to 48
Auxiliary actuated Up to 3Up to 4On request
Individual wiper actuationYesYesYes
Wiper actuation into a group
NoYes, only oneYes, on request

Product features

The UCS system consists in a range of standard panels with electrical part directly integrated into the panel case. The main features are:

  • Supply voltages: 24 Vdc and 110 – 220 Vac;
  • Possibility to operate up to 2 wipers and 3 auxiliaries;
  • Actuation of the wipers in single speed continuous mode and variable interval with delay from 5 up to 14 seconds;
  • Standard size panels according to DIN 43700/IEC 61554 with illuminated push button switches;
  • Overload protection of each wiper motor by means of an automatic circuit breaker located on the panel.

Compatible products

Compatible productsTypologyModel numberLink
Electric motorFor medium sized wiper systems
For large sized wiper systems
Electric motor serie PU, internally mounted
For straight line wiper, externally mounted
Z
S
PG
PG-EXT.LC
View
View
View
View

Product ID

Each control unit UCS series is uniquely identified by its serial number reported on a label placed on the back side of the panel.

Part numberParameter nameParameter value
M/N.X.Y.AuxModel number M/NM/N = UCS
Wipers number XX = 1÷2
Auxiliary devices number Y Y = Up to 3
Possible auxiliaries AuxAux = S for window washer equipments
Aux = A for compressed air
Aux = H for window and/or wiper heaters

Product features

The UCP system consists of a series of standard panels connected to a control box containing the electronic card that controls the motors and auxiliary devices. The main features are:

  • Supply voltages: 24 Vdc and 110 – 220 Vac;
  • Possibility to operate up to 10 wipers and 4 auxiliaries ;
  • Actuation of the wipers in single speed continuous mode and variable interval with delay from 5 up to 14 seconds;
  • Standard size panels according to DIN 43700/IEC 61554 with illuminated push button switches;
  • Overload protection of each wiper motor by means of an automatic circuit breaker located in the electric box.

Compatible products

Compatible productsTypologyModel numberLink
Electric motorFor medium sized wiper systems
For large sized wiper systems
Electric motor serie PU, internally mounted
For straight line wiper, externally mounted
Z
S
PG
PG-EXT.LC
View
View
View
View

Product ID

Each control unit UCP Standard series is uniquely identified by its serial number reported on a label placed on the back side of the panel.

Part numberParameter nameParameter value
M/N.X.Y.AuxModel number M/NM/N = UCP
Wipers number XX = 2÷10
Auxiliary devices number Y Y = Up to 4
Possible auxiliaries AuxAux = S for window washer equipments
Aux = A for compressed air
Aux = H for window and/or wiper heaters

Product features

The UCP system can be customized to satisfy the installation needs of complex situations such as on cruise and military ships. The features of these systems are:

  • Supply voltages: 24 Vdc and 110 – 220 Vac;
  • Possibility to operate up to 10 wipers and 4 auxiliaries;
  • Actuation of the wipers in single speed continuous mode variable interval with delay from 5 to 14 seconds;
  • Overload protection of each wiper motor by means of an automatic circuit breaker in the electric box.
  • Control panels with illuminated push button switches and dimmer connected to one or more control boxes. These panels can be fully custom made so to reproduce the layout of the bridge to facilitate identification of the wipers to be driven.

Compatible products

Compatible productsTypologyModel numberLink
Electric motorFor medium sized wiper systems
For large sized wiper systems
Electric motor serie PU, internally mounted
For straight line wiper, externally mounted
Z
S
PG
PG-EXT.LC
View
View
View
View

Product ID

Each system UCP Customized is customized and refers to the project drawing decided before ordering. It is uniquely identified by its serial number reported on a label placed on the back side of the panel.

If you cannot find the right product version or for any questions, do not hesitate to contact us. Please always communicate the motor serial number for spare parts.