S Motor unit

MAIN DESCRIPTION

A typical application for motor S series is for large-sized wiper systems (arms up to 1200 mm) of pleasure boats when the motor is installed below the window, an installation that doesn’t need the electromagnetic brake to fix the arm in park position. Motor type S is designed to:

  • Operate only in low voltage (12/24V), normally used for nautical applications;
  • Have high torque, maintaining reduced dimensions;
  • Have high strength;
  • Be easily wired and maintained.

S Motor Unit

Standard version technical features 
Model number M/NS motor for low/medium angles range
Available rated voltage VV = 12 ; 24 Vdc
Starting torque80 Nm
Nominal power85 W
Starting power420 W
SpeedV1 = 42 stroke/min
Bushing for wall thickness D D = 10÷100 mm, step 10 mm
Wiping angles α α = 30°÷90° step 5°
Self parking FcFc = DX right side, internal view and window upper part motor mounted
Fc = SX left side, internal view and window upper part motor mounted
Weight4,5 Kg
FinishingGrey painted

SA Motor Unit

Standard version technical features 
Model number M/NSA motor for high angles range
Available rated voltage VV = 12 ; 24 Vdc
Starting torque80 Nm
Nominal power85 W
Starting power420 W
SpeedV1 = 42 stroke/min
Bushing for wall thickness D D = 10÷100 mm, step 10 mm
Wiping angles α α = 95°÷110° step 5°
Self parking FcFc = DX right side, internal view and window upper part motor mounted
Fc = SX left side, internal view and window upper part motor mounted
Weight4,5 Kg
FinishingGrey painted

Compatible products

Compatible product Typology Model numberLink
Wiper armsPantograph (up to 1200 mm)
Pendulum (up to 1200 mm)
SP91P
SP91F
View
View
Control systemCentralized Control System (only 12-24 V)PWSView

Product identification

Each motor unit S series is uniquely identified by its serial number reported on a label placed on the back side of the wiper motor.

Part number Parameter nameParameter value
M/N.V.D.αModel number M/N
M/N = S low/medium angles range
M/N = SA high angles range
Voltage VV = 012 for 12 Vdc
V = 024 for 24 Vdc
Wall thickness DD = 010÷100 mm step 10 mm
Wiping angles αα = 030÷090 step 5° for S model
α = 095÷110 step 5° for SA model

Example: “S.024.050.075” indicates S model wiper motor, 24 Vdc voltage, shaft suitable for wall thickness within 50 mm and 75° wiping angle.

If you cannot find the right product version or for any questions, do not hesitate to contact us. Please always communicate the motor serial number for spare parts.