PG.3F window wiper


The straight line wiper PG.3F should be used on windows of any size, usually with wide base length, for heavy duty applications. These wipers consist of a wiper arm, with its blade, and a wiper motor unit, mounted internally, connected to the aluminium profile of the wiper within which a carriage alternately slides, driven by a belt, in both directions. Each component is custom made for each window and application.

This system is constructed out of non-corrosive and top-quality materials and extensive customization of finishes is available. It complies with the ISO 17899 compliance.

The straight line wiper PG.3F is equipped with DCS technology. In this case, the electric motor is equipped with an electronic speed regulator able to communicate with other devices via the CAN bus. This version is designed to ensure two operation modes: continuous and intermittent running with the arm movement synchronized and maximum speed running for each wiper. The operating conditions are stabilized by the speed regulator in a wide range of voltages.

Motor unit is characterized by a compact size with specially designed electric box: it is possible remove a motor without interrupting the CAN bus communication.

The wiper PG.3F is also available with double arm (type PGD.3F). On request these systems can be equipped with spray nozzles (option PG.ZZ) and with heated frame (option PG.HOT).

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), quality = 82


  • Available rated voltage: from 110Vac to 220Vac;
  • Superior components are used to ensure long lasting systems;
  • Automatic self-parking position;
  • Motor and worm wheel drive don’t need any maintenance operation.


  • Wiper arms lengths are designed to suit all applications;
  • Wiper arms springs pressure is carefully selected to ensure smooth operation;
  • All arms constructed out of non-corrosive materials such as stainless steel AISI 316;
  • Both the arm base and the blade can be rotated (blade rotation is optional) to fit the glass geometry;
  • Available flat and articulated blades. Blade length is selected to suit all applications.
P_Control Systems


  • The control unit is available in two versions: DCS-EXT and DCS-EXT.AUX (the DCS-EXT.AUX can control two auxiliary devices)
  • It’s available for power supply voltages between 110 and 230 Volt AC, 2 or 3-phases.
  • Control panel it is available in two sizes and different versions, depending on number and layout of the wipers;
  • Operating modes are available: intermitting mode, continuous mode;
  • The panel is backlighted, with dimmer;
  • Possibility of carrying out a predetermined washing cycle by means of the electrovalves of the window washer equipment.


  • Electrovalves for water or purge air supply;
  • Wash hose kits with various adaptors for securing hoses;
  • Wall or wiper arm installed spray nozzles;
  • Fully integrated wash systems including controllers;
  • Windows custom made antiglear screens.

Housing and Motor Features

Model Number
P.3FMotor unit for PG.3F straight line wiper
Housing Model Number
Complete PG profile
187012.001Complete PG profile with nozzles
187012.002Complete PGD profile
187012.003Complete PGD profile with nozzles
Wall Thickness DD = 18-35-70-105-150 mm
Wiper stroke length CC = 400÷2250, 50 mm steps for PG.3F model
C = 900÷4500, 50 mm steps for PGD.3F model
Motor Unit Side Position Motor unit can be positioned above or below the window, on the right or on the left side.
Spray NozzlesAdjustable fan shape 0° or 90° are available for all models.

Spray nozzles made with a copper tube 6x4xL mm are available.
Heating ElementMechanism case heaters 110 Vac or 220 Vac are available.
Cable Length1.5 m as standard.

Other length on the request.
FinishingHousing finishing standard is polyester coating white RAL 9010.

Other finishes on the request.

Arms Features

Model Number
16721Arm length shorter than 450 mm
16720 Arm length longer than 450 mm
Arm length shorter than 450 mm, adjustable blade fix
16722 Arm length longer than 450 mm, adjustable blade fix
Wiper Arm Length LL = 300÷1000 mm, 50 mm steps
BendingWiper arm may be cranked for inward glass window over 75 mm.

All solution customed.
FinishingStainless steel (as standard)

Other finishes on request

Blades Features

Model Number
BLFWiper blades for flat windows, for heavy duty applications
XWiper blades for curved windows, for heavy duty applications
Blade Length SS = 500÷1200 mm, 50 mm steps; 1300÷1500 mm, 100 mm steps

Control Panel Features

Operation ModesOperation with panel: CAN bus commands is generated from a control panel, with a standard keypad proposed by us

Operation with gateway: CAN bus commands is generated from a gateway connected with switches installed by the customer on the consolle

Direct operation: CAN bus commands is generated directly from the integrated bridge system
Number of WipersAdvanced control allows to operate up to 12 groups from 1 up to 8 wipers.

It allows a perfect synchronization of the wipers in all operating conditions, both in continuous and intermittent operation mode. Synchronization occurs even if the wipers are different in dimensions and wiping angles.
Number of AuxiliariesThe DCS system provides the possibility to drive auxiliary devices that normally equips ship bridge, like elvalves of window rinse system, glass heater and wiper heater contactors and other devices. Each motor/control unit can manage 1/2 auxiliaries. For centralized management of auxiliaries, we offer an auxiliary devices control unit, DCS.AUX4, a relay unit controlled by CANbus messages, which provides 4 power outputs to drive such auxiliaries.

Control Unit Features

Model Number
DCS.INTControl unit without auxiliaries management
DCS.INT.AUXControl unit with maximum 2 auxiliaries management
Voltage VV = 110/230 Vac
Windscreen Wiper PG.3F Brochure