LMS System

Nautical Line

The control system LMS is developed for two speeds wiper motors with a voltage from 12V up to 24V DC. The wiper arms movement is synchronized in all working modes. Synchronization is obtained by imperceptibly stopping the motors that arrive firstly to the park position. There are two versions of LMS control depending on the wiper motors number you have to drive:

 

  1. LMS modular system, to drive from 3 up to 9 wipers and 1 auxiliary.
  2. LMS.02,  to drive two wipers and one auxiliary;

LMS Modular system consists of two components: the control panel (LMS.E) and the power module (LMS.P). Each power module can control up to three wiper motors and up to three modules can be connected together. The main features of this system are:

  • power supply: multivoltage from 12V up to 24V DC;
  • possibility to drive 9 wipers and 1 auxiliary;
  • wiper working mode in continuous high and low speed, and three steps of interval delays;
  • maximum current for each motor: 8A
  • maximum current for auxiliary: 5A
  • overload protection by means of automatic fuses (PTC).

LMS.02 control panel drives two wiper motors. The electrical part is contained into the panel case and the connections are made in the back side of it.  The main features of this system are:

  • power supply: multivoltage from 12V up to 24V DC;
  • possibility to drive 2 wipers and 1 auxiliary;
  • wiper working mode in continuous high and low speed, and three steps of interval delays;
  • maximum current for each motor: 8A
  • maximum current for auxiliary: 5A
  • overload protection by means of automatic fuses (PTC).
Category
Modular control system
Tags
Wiper control system