CT Control unit

MAIN DESCRIPTION

The CT control unit is a compact control system for the management of one or two wiper motors. This system is suitable for wiper motors operating at low voltage, both single and double speed. The versions differ from the number of controlled wipers and their power.

 CT41 SystemCT42 SystemCT41P SystemCT42P System
N° actuated wiper1212
N° actuated auxiliary1111
Maximum power actuated motor40 W40 W85 W85 W

Product features

Control systems CT41 and CT42 drive respectively one and two wipers. They look like a rocker switch. The case contains the electronic parts to drive the motors. The main features are:

  • Possibility to drive wiper motors with a maximum power of 40 W;
  • Power supply: multivoltage from 12 up to 24 Vdc;
  • The management of single and double speed wiper motors with continuous and intermittent operating mode. The CT42 is able to synchronize the movement of the wipers;
  • Dynamic parking of the motors;
  • Overload protection by means of automatic fuses (PTC);
  • Automatic washing cycle.

Compatible products

Compatible productsTypologyModel numberLink
Electric motorFor medium sized wiper systems
For small sized wiper systems
For straight line wiper, externally mounted
M
ES
PG-EXT.LC
View
View
View

Product ID

Each control unit CT series is uniquely identified by its serial number reported on a label placed on the back side of the panel.

Model numberDescription
CT41It can drive one wiper
CT42It can drive two wipers

Product features

Control system CT41P and CT42P drive respectively one and two wipers. The console mounted part looks like a rocker switch connected via a supplied cable to a control unit containing the electronic parts to drive the motors. The main features are:

  • Possibility to drive wiper motors with a maximum power of 85 W;
  • Power supply: multivoltage from 12 up to 24 Vdc;
  • The management of single and double speed wiper motors with continuous and intermittent operating Mode. The CT42P is able to synchronize the movement of the wipers;
  • Dynamic parking of the motors;
  • Overload protection by means of automatic fuses (PTC);
  • Automatic washing cycle.

Compatible products

Compatible productsTypologyModel numberLink
Electric motorFor small sized wiper systems
For medium sized wiper systems
For medium sized wiper systems
ES
LP
M
View
View
View

Product ID

Each control unit CT series is uniquely identified by its serial number reported on a label placed on the back side of the panel.

Model numberDescription
CT41PIt can drive one wiper
CT42PIt can drive two wipers
If you cannot find the right product version or for any questions, do not hesitate to contact us. Please always communicate the motor serial number for spare parts.