SPEICH - Windscreen Wipers

HOMEPAGE

COMPANY
DISTRIBUTORS
PRODUCTS
DOWNLOAD

CONTACT
ORDER FORM

Heated arm windscreen wiper type MH

Motor Units

Designed to be installad on ships working in tough climatic conditions.
The arm is equiped with a heating element in order to prevent ice formation.
The electric wiring of heating element is made through the motor shaft.
The motor unit has park position facility; right or left side must be specified with the order.

motor drawing

Technical features

Available rated voltage	DC: 24V both for motor and heating element
Power	Starting: 220W Rated: 55 W
Heating element power	55 W
Wiping angle available	From 30° to 90° with 5° step
Starting torque	45 Nm
Strokes per minute	90
Length of threaded bushing	For wall thickness: 15 - 30 - 45 - 60 - 80 - 100 mm
Safety distance from magnetic compass	1.2 m BSH certified
Working temperature	-30°C +40°C
Weight	2.6 Kg

Code

The code of motor unit type MH is composed as follows: MH.t.d.a.
Where "MH" indicates the type, "t" the voltage, "d" the thickness of the bulkhead and "a" the wiping angle.

Example:
to order a motor unit type MH, 24V with wall thickness 40mm and 65° wiping angle, it is necessary to indicate following code:
MH.024.30.75

To order a spare motor unit, it is necessary to communicate the serial number of the motor to be changed. The serial number is written on a label placed on the back of the motor.

Wiper Arms

The arms are custom made using AISI316 stainless steel.
The standard finish is hand-polished natural colour.
On request it is possible to supply the arms in black.
Arms length is from 300mm to 900mm for both pantograph and pendulum setups, in either single or double configurations.
For technical support, please fill up in the order form in how to order section.

Pantograph Arms